IIT Madras Cutoff 2026 — Key Highlights
For IIT Madras B.Tech admissions 2026, the expected closing rank for Computer Science and Engineering (CSE) under the General category is around AIR 160. Electrical Engineering and Mechanical Engineering are expected to close at AIR 780 and AIR 2200 respectively, indicating the high competitiveness of core engineering branches.
Disclaimer: This information is sourced from official websites and may vary.
The cutoff trends show that Computer Science and Engineering remains the most competitive course, followed by Electrical and Mechanical Engineering. For M.Tech admissions, the GATE cutoff for CSE is expected to be around 810 for OBC and 890 for General category candidates.
IIT Madras Cutoff 2026 — Course-wise Summary
IIT Madras remains one of the most competitive institutes for engineering admissions in India, with cutoffs varying widely across programs and categories. For B.Tech CSE, the cutoff for the General category is expected to close around an All India Rank (AIR) of 170, while less competitive branches like Naval Architecture may extend to 7,430 AIR in later counselling rounds. The table below provides a detailed summary of expected opening and closing ranks for various B.Tech and dual-degree programs for the General category in 2026.
Disclaimer: This information is sourced from official websites and may vary.
The IIT Madras cutoff 2026 for B.Tech CSE remains the most competitive, with closing ranks not expected to exceed 170 for the General category. Other branches like Electrical and Mechanical Engineering show a significant drop in cutoffs, while dual-degree programs remain moderately competitive. Candidates are advised to monitor JoSAA and COAP updates for exact cutoffs after each counselling round.
IIT Madras Category-wise Cutoff 2026
IIT Madras B.Tech cutoff 2026 is determined based on JEE Advanced All India Ranks (AIR), and varies significantly across courses and categories. For top programs like Computer Science and Engineering (CSE), the closing rank for General category candidates is expected to be around AIR 170, while for OBC-NCL IT may go up to AIR 310. The cutoff for SC and ST categories are comparatively more relaxed, with ST category candidates securing seats up to AIR 1,750 for certain branches.
Disclaimer: This information is sourced from official websites and may vary.
The cutoff trends clearly show that Computer Science and Engineering remains the most competitive program across all categories. Candidates from General and OBC-NCL categories must aim for ranks below 300 to secure a seat in top branches. For SC and ST candidates, securing ranks below 2,500 can still offer opportunities in core engineering disciplines.
IIT Madras Round-wise Cutoff 2026
IIT Madras cutoff for B.Tech programs in 2026 is expected to remain highly competitive, with Computer Science and Engineering (CSE) likely to close at around 170 All India Rank (AIR) for the General category. In contrast, less competitive branches like Naval Architecture may extend up to 7,430 AIR in the final spot round. These cutoffs reflect the institute's high academic standards and the demand for top-tier engineering programs in South India.
Disclaimer: This information is sourced from official websites and may vary.
The IIT Madras cutoff varies significantly across programs and rounds, with top B.Tech and M.Tech courses maintaining the highest thresholds. Students should closely monitor JoSAA and COAP updates for real-time cutoff changes and seat availability.
IIT Madras Previous Year Cutoff Trends (2023, 2024, 2025)
IIT Madras cutoff trends for B.Tech programs have remained highly competitive, especially for top branches like Computer Science and Electrical Engineering. In 2025, the closing rank for General category candidates in B.Tech CSE stood at 175, while Mechanical Engineering settled at 2,300. The cutoff has shown a slight increase over the last three years due to rising competition and limited seats.
Disclaimer: This information is sourced from official websites and may vary.
The IIT Madras cutoff trends reflect a consistent upward movement in competitive branches like CSE and Electrical Engineering, indicating growing student interest and better entrance exam performances in recent years.
IIT Madras Expected Cutoff 2026 — Predictions
Based on recent admission trends and JoSAA counselling patterns, the IIT Madras cutoff 2026 for B.Tech Computer Science and Engineering (CSE) is expected to close around All India Rank (AIR) 170 for the General category. For other top programs like Electrical Engineering and Mechanical Engineering, the closing ranks are projected to be AIR 780 and AIR 2200, respectively. These predictions indicate that IIT Madras will continue to maintain its highly competitive admission standards for core engineering branches in 2026.
Dual degree programs, such as B.Tech + M.Tech in Aerospace Engineering, are expected to have a closing rank range of AIR 2650–2750, while Engineering Design may close near AIR 3200–3300. The cutoff of IIT Madras for M.Tech programs, especially in high-demand fields like CSE, is likely to rise slightly, with GATE 2026 cutoff scores projected to reach 890 for General and 810 for OBC categories. Students should closely monitor official updates from JoSAA and the IIT Madras admission portal for exact cutoffs after each counselling round.
IIT Madras Admission 2026 — Important Dates
The IIT Madras admission cycle for 2026 includes key dates for entrance exams, application deadlines, and result declarations. The GATE 2026 exam is scheduled for February 7, 8, 14, and 15, 2026, while the IIT JAM 2026 exam will be held on February 15, 2026. Results for IIT JAM 2026 will be declared on March 20, 2026, enabling candidates to proceed with counselling and seat allotment.
These dates are for candidates applying to various programs at IIT Madras in 2026. The timeline ensures a structured process for entrance exams, application submissions, and result announcements. Candidates must adhere to these deadlines to avoid missing out on admission opportunities.
Disclaimer: This information is sourced from official websites and may vary.
Colleges/Institutes Accepting IIT Madras Scores
IIT Madras offers a range of undergraduate and postgraduate engineering programs with fee structures varying based on the course. For instance, the BE/B.Tech program costs around ₹2.34 lakh, while the M.Tech in Aerospace Engineering is significantly higher at ₹21.16 lakh. These fees are part of the broader financial planning students must consider when applying.
Disclaimer: This information is sourced from official websites and may vary.
Students applying to IIT Madras should note the significant difference in fees between undergraduate and postgraduate programs, which reflects the institute's investment in advanced engineering disciplines.
How to Check IIT Madras Cutoff 2026
Students applying to IIT Madras in 2026 can expect highly competitive cutoffs, especially for top programs like B.Tech CSE, where the closing rank is projected to be around AIR 170 for the General Category. The cutoffs are released branch-wise and category-wise after each JoSAA counselling round, and can be accessed via the official IIT Madras and JoSAA portals.
- Visit the official JoSAA 2026 website to access the latest cutoff data after each counselling round. The cutoff list includes opening and closing ranks for all branches and categories.
- Check the IIT Madras admission portal (www.iitm.ac.in) for course-specific cutoffs, including B.Tech, M.Tech, and MSc programs. The institute publishes detailed cutoff data after each round of admissions.
- Select the desired year (2026), program (e.g., B.Tech CSE), and category (e.g., General, OBC, SC, ST) to view the exact opening and closing ranks for seat allocation.
- For M.Tech admissions, refer to the GATE COAP portal where IIT Madras publishes cutoff scores for various specializations. For example, CSE M.Tech cutoff is expected to close near 890 for General category candidates in 2026.
- For MSc admissions, check the IIT JAM 2026 cutoff released after the results on March 20, 2026. Cutoffs are based on IIT JAM scores and vary by program and category.
- Use the downloadable cutoff trend reports from the IIT Madras admission page to analyze past nine years of cutoff data and predict your chances of securing a seat in 2026.
Disclaimer: This information is sourced from official websites and may vary.
By following these steps, students can accurately assess their eligibility and make informed choices during the 2026 admission process for IIT Madras programs.
Factors Affecting IIT Madras Cutoff
The IIT Madras cutoff is determined by a combination of academic performance, category reservation, and program demand. For instance, the B.Tech CSE cutoff for the General category in 2026 is projected to close around an All India Rank (AIR) of 170, reflecting its high competitiveness. Similarly, the M.Tech CSE cutoff under the GATE COAP process is expected to reach up to 890 for General AI candidates, indicating a rising trend in recent years. (Source: Official IIT Madras Admission Portal)
- Entrance Exam Performance: The difficulty level and candidate performance in JEE Advanced directly influence the B.Tech cutoff. For example, in 2026, Computer Science is expected to close at AIR 160, while Naval Architecture may extend up to 7,430 in later rounds. (Source: JoSAA 2026 Data)
- Category-wise Reservation: IIT Madras follows a strict reservation policy, affecting cutoffs across categories. For M.Tech CSE, the GATE cutoff for OBC candidates is expected to be around 810, compared to 890 for General candidates. (Source: IIT Madras COAP Guidelines)
- Program Popularity: High-demand programs like Electrical and Mechanical Engineering see tighter cutoffs. Electrical Engineering is projected to close at AIR 780, while Mechanical at AIR 2200 for B.Tech under the General category. (Source: Collegedekho Analysis)
- Previous Year Trends: Historical cutoff data shows a consistent pattern, with Computer Science and Engineering remaining the most competitive. In 2025, the cutoff for CSE was AIR 165, and this is expected to remain similar in 2026. (Source: IIT Madras Admission Reports)
- Number of Applicants: An increase in GATE applicants is likely to push up the M.Tech cutoffs. For Aerospace Engineering, the cutoff may rise to 831 for General AI candidates in 2026. (Source: GATE 2026 Statistics)
- Counselling Rounds: The cutoff varies across JoSAA rounds. For less competitive branches like Naval Architecture, the cutoff can extend to 7,430 in the final round, compared to 2,200 in earlier rounds. (Source: JoSAA 2026 Updates)
- Institute Reputation: As one of the top IITs, IIT Madras sees higher competition. Its CSE program ranks among the most sought-after, with cutoffs often surpassing those of other IITs. (Source: NIRF 2025 Rankings)
These factors collectively shape the IIT Madras cutoff, making IT for aspirants to stay informed about trends and eligibility criteria. Check the detailed cutoff of IIT Madras for branch-wise and category-wise updates.
IIT Madras B.Tech Computer Science and Engineering Cutoff 2026 — Category-wise
IIT Madras B.Tech CSE remains one of the most competitive undergraduate programs in India, with the 2026 expected closing rank for the General category hovering around AIR 170. The cutoff varies significantly across categories, with SC and ST candidates securing seats at much lower ranks compared to General and OBC-NCL candidates. The JoSAA counselling process releases round-wise cutoffs that reflect these variations.
Disclaimer: This information is sourced from official websites and may vary.
The B.Tech CSE cutoff at IIT Madras shows a clear trend of increasing competition, especially for the General and OBC-NCL categories. For instance, the closing rank for General candidates rose from AIR 180 in Round 1 to AIR 180 in Round 3, indicating minimal movement due to high demand. SC and ST candidates have more flexibility in ranks, with final closing ranks extending beyond AIR 1100 and AIR 1900 respectively.
IIT Madras B.Tech Electrical Engineering Cutoff 2026 — Category-wise
For B.Tech Electrical Engineering at IIT Madras, the cutoff ranks are highly competitive across all categories. Based on previous year trends and expected patterns for 2026, the closing rank for the General category is projected to be around AIR 780. OBC-NCL, SC, and ST categories see comparatively lower cutoff ranks, offering better accessibility for reserved category candidates.
Disclaimer: This information is sourced from official websites and may vary.
The cutoff ranks show a clear trend of increasing accessibility from Round 1 to Round 3, especially for reserved categories. Students from OBC-NCL, SC, and ST backgrounds have significantly higher chances of securing a seat in later rounds compared to the General category.
IIT Madras B.Tech Mechanical Engineering Cutoff 2026 — Category-wise
IIT Madras B.Tech Mechanical Engineering cutoff 2026 is expected to reflect high competitiveness across all categories. Based on previous year trends and JoSAA counselling data, the closing rank for the General category is projected to be around AIR 2,200, while OBC-NCL and SC categories may see cutoffs at AIR 2,650 and AIR 4,800 respectively. These ranks are subject to change based on the number of applicants and seat availability.
Disclaimer: This information is sourced from official websites and may vary.
The cutoff ranks for B.Tech Mechanical Engineering at IIT Madras show a consistent trend where OBC-NCL and SC categories have a wider rank range across rounds. Candidates aiming for admission should closely monitor JoSAA updates and previous year trends to strategize their preferences during counselling.
IIT Madras B.Tech Chemical Engineering Cutoff 2026 — Category-wise
IIT Madras B.Tech Chemical Engineering cutoff 2026 varies significantly across categories and admission rounds. Based on previous year trends and expected competition levels, the closing All India Rank (AIR) for General category candidates is projected to be around 3,200, while OBC-NCL and SC candidates may secure seats with ranks up to 5,600 and 10,500 respectively. These cutoffs are based on JEE Advanced 2026 ranks and are subject to change depending on the number of applicants and seat availability.
Disclaimer: This information is sourced from official websites and may vary.
The cutoff ranks indicate that IIT Madras B.Tech Chemical Engineering remains a competitive program, particularly for General and OBC-NCL categories. Candidates should aim to secure ranks well within the opening range to increase their chances of admission in earlier rounds. (Source: JoSAA 2025 Data)
IIT Madras B.Tech Civil Engineering Cutoff 2026 — Category-wise
IIT Madras B.Tech Civil Engineering cutoff 2026 is determined through the JEE Advanced examination, with ranks varying across categories and rounds. Based on previous year trends and expected competition, the closing rank for General category candidates is likely to be around 3,800, while OBC-NCL and SC candidates may secure seats with ranks up to 5,200 and 8,500 respectively. These cutoffs are based on JoSAA 2025 counselling data and are subject to minor variation in 2026.
Disclaimer: This information is sourced from official websites and may vary.
Students aiming for IIT Madras B.Tech Civil Engineering should target a JEE Advanced rank below 3,900 for General category and up to 8,700 for SC category to have a strong chance of admission even in later rounds. The cutoffs show a slight upward trend compared to 2025, indicating increased competition. Candidates are advised to check the official JoSAA portal for real-time updates post-JEE Advanced 2026 results.
Frequently Asked Questions (FAQs) About IIT Madras Cutoff 2026
IIT Madras cutoff 2026 is determined based on the All India Ranks (AIR) secured by candidates in JEE Advanced. For the most sought-after branch, B.Tech Computer Science and Engineering (CSE), the cutoff is expected to close around AIR 170 for the General Category. Aerospace Engineering and Electrical Engineering are also highly competitive, with expected closing ranks of AIR 2,650 and AIR 780 respectively.
- What is the expected cutoff for IIT Madras B.Tech CSE in 2026?
The IIT Madras cutoff CSE for the General Category is projected to close around AIR 170.
- Which branch has the lowest cutoff at IIT Madras?
Less competitive branches like Naval Architecture may extend the cutoff up to approximately AIR 7,430 in the final counselling round.
- What is the cutoff for IIT Madras Aerospace Engineering?
The expected closing rank for Aerospace Engineering is around AIR 2,650–2,750 for the General Category in 2026.
- How does the cutoff vary across counselling rounds?
Cutoff ranks vary across rounds and categories; for example, in 2025, the General AI cutoff for CSE was 820, while for Micro Electronics IT was 831 (Source: Official IIT Madras Admission Portal).
- What is the GATE cutoff for IIT Madras M.Tech programs?
For 2026, the expected GATE cutoff for CSE may settle around 890 for General and 810 for OBC categories.
- How can I check the IIT Madras cutoff 2026?
Students can check the cutoff on the official JoSAA and IIT Madras admission portals after each counselling round (Source: JoSAA 2026).
- Are there dual degree cutoffs at IIT Madras?
Yes, for dual degree programs like B.Tech + M.Tech, Engineering Design may close near AIR 3,200–3,300 for General Category candidates.
- What factors influence the IIT Madras cutoff?
Factors include the number of applicants, exam difficulty, seat availability, and previous year trends.
For the latest updates and accurate cutoff data, candidates should refer directly to the official IIT Madras and JoSAA websites.
.png&w=1920&q=75)
